Mark Levinson N32 - Manual (Page 53)

4-9
Nº32 Reference Preamplifier Controls and Modes
6. Rotate the select knob or press the select / buttons until
the Rec.Out parameter displays on the front panel. Then, press
the enter button to select this parameter.
7. Rotate the volume knob or press the volume ± buttons to scroll
through all available settings until the NONE (default) setting
displays on the front panel.
8. When the NONE setting appears, press the enter button to
select this setting.
The SAVING DATA message will appear on the front panel
display to indicate that the new setting is being saved.
9. Press and release the setup button until the setup menu is
closed.
Configuring the
Source Input
To configure the source input:
1. Rotate the select knob or press the select / buttons to select
the source input (the input assigned to the Nº32 input connec-
tors selected in step 4 of “Making EQ Mode Connections” on
page 4-7).
2. Press and hold the setup button until the Name parameter
appears on the front panel display.
The front panel setup LED lights when the setup menu is open.
3. Rotate the select knob or press the select / buttons until
the Rec.Out parameter appears on the front panel display.
Then, press the enter button to select this parameter.
4. Rotate the volume knob or press the volume ± buttons to scroll
through all available settings until the NONE setting displays
on the front panel.
5. When NONE appears, press the enter button.
The SAVING DATA message will appear on the front panel
display to indicate that the new setting is being saved.
6. Press and release the setup button until the setup menu is
closed.
Using EQ Mode To record and playback with EQ mode:
1. Rotate the select knob or press the select / buttons to select
the input named EQ.
Selecting the source input could cause a feedback loop.