Mark Levinson N32 - Manual (Page 13)

1-5
Nº32 Reference Preamplifier Getting Started
Unpacking When unpacking the Nº32:
DO save all packing materials for possible future shipping needs.
DO inspect the Nº32 for signs of damage during shipment. If
damage is discovered, contact an authorized Mark Levinson dealer
for assistance making appropriate claims.
DO locate and remove the accessory box from the carton. Make
sure it contains all of the items listed in the table below. If not,
contact an authorized Mark Levinson dealer.
* The remote control comes with two AAA alkaline batteries that should be replaced as needed.
** One pair of white gloves is provided to assist with the initial unpacking and installation of the
Nº32.
Product Registration Please register the Nº32 within 15 days of purchase. To do so, regis-
ter online at www.marklevinson.com or complete and return the
included product registration card. Retain the original, dated sales
receipt as proof of warranty coverage.
Placement and
Ventilation
DO install each Nº32 chassis on its own shelf for proper
ventilation.
DO install each Nº32 chassis on a solid, flat, level surface.
DO install the preamplifier chassis close to associated components
to keep interconnecting cables as short as possible.
Note
In some cases, it is better to use longer interconnecting cables
between the preamplifier and the power amplifier to allow for shorter
loudspeaker wires.
DO select a dry, well-ventilated location out of direct sunlight.
Item Quantity
Detachable AC power cord 1
Multi-pin DC power cables 2
Nº32 remote control 1
5/64-inch Allen key 1
3/32-inch hex driver 1
AAA alkaline batteries* 2
White gloves** 1
Warranty & Product Registration Card 1