Installation and user manual – MGE UPS Systems 40-75KVA User Manual
Page 25
Installation and User Manual
2.4.2
Characteristics of the Output Contacts
Relay Type
Normally Open.
Max. voltage
250VAC, 30VDC.
Max. current
2 A.
Cable
4 x 0.93 mm, 6.6 ±0.3 mm.
2.4.3
Characteristics of the Input Contacts
Switched voltage
5VDC.
Consumption
10 mA.
Cable
4 x 0.34 mm, 5 ±0.5 mm.
Output alarms are always activated on the conditions stated unless requested by customer to operate on
other conditions.
Input contacts are designed for remote UPS operation. Use extreme caution when using these contacts so as not
to endanger persons or compromise the UPS load.
Installation
2 — 7
86-173010-00 A00
See also other documents in the category MGE UPS Systems Tools:
- Pulsar EX 1000 (28 pages)
- 4.5 kVA (32 pages)
- 1100 (196 pages)
- EPS 8000 (54 pages)
- S EXB 2500 (22 pages)
- Pulsar Extreme 3200C (28 pages)
- ESV 22+Rack (24 pages)
- GES-801L (22 pages)
- Comet EX 7 RT 3:1 (38 pages)
- EX 11RT (72 pages)
- Galaxy PW (44 pages)
- 3 (34 pages)
- Pulsar TM 30 (18 pages)
- 22+ EB 22 (44 pages)
- 1500C (28 pages)
- Rackmount PDU (36 pages)
- Pulsar Esprit 313.5 kVA (6 pages)
- EX-5 (76 pages)
- 30A (30 pages)
- AmpMeter PDU (52 pages)
- EX30 (106 pages)
- 1100 Tower (36 pages)
- 2000 (34 pages)
- 4000 RT (38 pages)
- Pulsar EXtreme C UPS 1500 VA (4 pages)
- FlexPDU 6 AUS (12 pages)
- POWER-SURE 700 (52 pages)
- 250A (34 pages)
- EX 1000 (28 pages)
- EX7 (18 pages)
- EX30Rack (24 pages)
- 12280 kVA (13 pages)
- 40-150kVA (56 pages)
- 100 (32 pages)
- Uninterruptible Power Provider (4 pages)
- EPS 7000 (62 pages)
- 300 (6 pages)
- EX10Rack (22 pages)
- 500 (4 pages)
- EPS 6000 (84 pages)
- S3 (64 pages)
- EX RT CLA (6 pages)
- 3000 (32 pages)
- 3.5 to 21 kVA N+1 (54 pages)