beautypg.com

Lighting burner - millivolt, Pilot – Monessen Hearth HDV500NV/PV User Manual

Page 33

background image

56D3048

33

HDV Series Direct Vent Gas Fireplace

OF

F

PILO

T

ON

PILOT

FP1937

control knob on

MAIN BuRNeR SWItCH
The “ON/OFF/RS” switch for the main burner can be found behind door
of the fireplace. This switch allows you to turn on and to turn off the main
burner without using the gas valve knob. Make sure the button is in the
“ON” position to light the main burner. Figure 46

lIGHtING tHe BuRNeR
Depress and turn the knob counterclockwise

to the “ON” position.

Figure 47. It will take less than four (4) seconds for the burner to ignite.

PIlot PoSItIoN
Depress and turn knob to pilot position to keep burner off while maintain-
ing the pilot light. Figure 48

Depress and turn knob clockwise

to “OFF” position. Figure 49

to tuRN oFF GAS - MIllIVolt

Figure 48 -
Pilot Position

lIGHtING BuRNeR - MIllIVolt

PILOT

OF

F

PILOT

O

N

PILOT

OF

   

   

 P

IL

O

    ON

FP1935
control knob pilot

OFF

ON

RS

Figure 49 -
Off Position

W

ARNING

the control is fitted with a safety interlock
device which prevents unsafe ignition of the
pilot burner after the control knob has been
turned to the oFF position. the knob may
only be rotated back to the PIlot position
after the safety magnet has been released
(approximately 60 seconds). you will hear a
“click” when the safety magnet releases.

Figure 47 -
On Position

Figure 46 -
On/Off/RS Switch

oPeRAtING INStRuCtIoNS - MIllIVolt