Motorola BRUTE NNTN7794C - Manual (Page 81)

6. Settings 71
S
e
tti
n
g
s
In most cases, when you delete a ring tone that you
purchased from your phone, you will have to purchase
it again.
To delete a ring tone:
1. Press / > Multimedia > Ring Tones .
2. Make sure Vibrate All is set to Off .
3. Highlight a ringtone and press / > Delete .
4. Press Yes (left softkey) to confirm.
Vibrate Settings
Vibrate All
The Vibrate All option allows you to be notified of calls
and messages with a vibration instead of an audible
alert.
To activate Vibrate All:
ᮣ Press and hold the volume button down in standby
mode. (Pressing and holding displays “VibeAll:
On.” Continuing to hold the button down displays
“VibeAll: Locked.”)
– or –
Press / > Multimedia > Ring Tones > Vibrate All .
Set this option to On or Locked .
To deactivate Vibrate All:
1. Press and hold the volume key up to unlock
vibrate all.
2. Press the volume key up repeatedly to select a
volume level or press /
> Multimedia >
Ring Tones > Vibrate All > Off .
These icons indicate how the ringer is set:
Tip: Setting this option to Locked requires you to press and
hold the volume control up to turn
Vibrate All off. The
Locked option helps prevent you from accidentally
turning Vibrate All off.
/ The phone always vibrates instead of
making a sound.
. The phone vibrates instead of making a
sound for phone calls.
" Direct Connect calls, Group Connect calls,
and Talkgroup calls are heard through the
earpiece, not the speaker.