Motorola BRUTE NNTN7794C - Manual (Page 101)

6. Settings 91
S
e
tti
n
g
s
Unlocking Your Phone
ᮣ At the “Enter Unlock Code” prompt, enter your
unlock code and press
Ok (left softkey).
Changing the Lock Code
1. Press / > Settings > Security > Change
Passwords .
2. Select Unlock Code then enter your current unlock
code and press Ok (left softkey).
3. Enter and reenter your new lock code, pressing
Ok (left softkey) after each.
Calling in Lock Mode
You can place calls to 911 when in lock mode.
ᮣ To call an emergency number, dial 911 and
press `.
Locking Your Keypad
When your phone is closed and in standby mode, your
keypad locks to prevent accidental key presses.
ᮣ To lock your keypad now, press / > Settings >
Security > Keypad Lock > Lock Now , or press
/*.
ᮣ To change how long your phone waits before it
automatically locks your keypad, press /
>
Settings > Security > Keypad Lock > Auto Lock and
select a time interval of 30 seconds, 1minute, 5
minutes, 10 minutes, 15 minutes, 20 minutes, or Off .
Unlocking Your Keypad
ᮣ To unlock your keypad, press /*.
Note: If the keypad setting is set to off , your keypad will
remain unlocked.