Motorola BRUTE NNTN7794C User Manual
Page 45
35
Mak
in
g
C
a
lls
To send a picture during a call:
1.
While in a Direct Connect call, press
Picture
(right
softkey). A list of pictures that can be included in a
Direct Connect call appears.
2.
Select a picture and press the DC button to send it.
3.
Wait while the picture is transmitted. The Direct
Connect call is temporarily interrupted while a
picture is transmitted.
4.
When prompted, press the DC button to resume
the Direct Connect call.
Starting a Call by Sending a Picture
You can start a call by choosing a stored picture from
the Media Center.
To do this, you must have the recipient’s Direct Connect
number and IP address stored in your Contacts.
To start a call by sending a picture:
1.
Press /
> Multimedia > Media Center
and then
highlight or select a picture.
2.
Press /
>
Send Via... > Direct Send
.
3.
Select
A Contact
or
A Recent
Call
. These names
have Direct Connect numbers and IP addresses
stored.
4.
Select a name and press the DC button to send
the picture.
5.
When prompted, press the DC button to resume
the Direct Connect call.
Receiving a Picture
When someone sends you a picture using Nextel
Direct Send, your phone emits a tone or vibrates and a
message appears on the display asking you to accept
the picture.
Note:
The first time you send a stored picture after turning the
phone on, the message
Picture Fees May Apply
appears and you are prompted to respond. Press
Yes
(left softkey) to send the picture. Press
No
(right softkey)
to cancel.
Tip:
When a person sends you My Info from his or her phone,
including his or her Direct Connect number and IP
address, you can then easily store this information to
Contacts from the Recent Calls list.