Motorola 68014301013 - Manual (Page 6)

4 Installation
Mount the vehicle integration kit securely. The best location
for the kit is under the dashboard. The kit should be
protected from dirt and moisture, have adequate space for
cooling, and allow for cable connections.
Caution: The User Interface Module (UIM) should be
connected before vehicle power is applied to the vehicle
integration kit, otherwise damage may occur.
Caution: The location must not interfere with the vehicle’s
air bag.
The vehicle integration kit consists of these connectors:
Connect the audio cable(s)
Use the audio cable(s) to connect the car kit to your music
input device(s). You can connect:
• an iPod/iPhone
• a USB storage device with music (AAC, M4A, MP3, and
WMA audio files are supported)
• a music device with 3.5mm headphone jack
To connect the audio cable:
1 Connect cable connector J to vehicle integration kit
connector D (shown on page 4).
2 Connect your music device to the audio cable(s):
• To play music from a USB storage device,
connect cable connector K to the USB storage
device.
Note: Only one USB device at a time can be
connected to your car kit.
Audio Cable
(connector D)
ISO Cable
(connector A)
Selective
Mute Switches
User Interface Cable
(connector B)
Microphone
(connector C)
Reserved for
Future Use
J
K
L