Motorola 68014301013 User Manual

Page 12

Installation

Install third-party vehicle specific adapter harness
(if needed)

Some vehicles require a vehicle-specific adapter harness
(not supplied) that allows integration of the harness into the
vehicle entertainment system. The connectors on the ISO
cable are designed to connect directly to such a third-party
harness. If you choose to use a vehicle-specific harness,
follow the guidelines provided with that harness.

Install the ISO cable

Failure to follow these steps may result in product
malfunction or damage.

Disconnect battery from vehicle.

Caution:

Removing battery power may set trouble

codes that can only be reset by a factory diagnostic
tool on some vehicles. Please check with your vehicle
manufacturer if you are unsure how your vehicle may
react.

Disconnect appropriate connections on the vehicle
entertainment system to allow installation of the ISO
cable (and adapters, if needed).

Connect cable connectors H and I to the vehicle
entertainment system (or adapters, if needed).

Connect cable connector G to the vehicle wiring
harness ISO connectors (or adapters, if needed).

Connect cable connector F to vehicle integration kit
connector A (shown on page 4).

Note:

Make sure cable connector is plugged all the

way into the vehicle integration kit.

If needed, the connection points for mute, battery and
ignition can be configured to match your vehicle’s
harness using the alternate connection points on the
ISO harness.

Reconnect battery to vehicle.

Install to auxiliary input (optional)

If you wish to connect your car kit's music audio output to a
stereo auxiliary input on your vehicle entertainment
system:

should be no gap
between connector
and housing