Motorola 68014301013 - Manual (Page 5)

3 Installation
Installation
Before you begin
Caution: Only qualified personnel should install this car kit.
Because of the wide variety of vehicle types and models, it
may be necessary to contact the vehicle manufacturer for
detailed installation information.
Caution: An air bag inflates with great force. Do not place
objects, including communication equipment, in the area
over the air bag or in the air bag deployment area. If the
communication equipment is improperly installed and the
air bag inflates, serious injury could occur. If needed,
contact the vehicle manufacturer for air bag information
specific to the vehicle.
Please follow these guidelines:
• Mount components securely on strong surfaces to
prevent shifting that could cause injury or interfere with
safe vehicle operation. Use the supplied mounting
hardware as needed.
• Mounted components and attached wires or cables
must not interfere with seating or leg space.
• Route cables so they are protected from pinching, sharp
edges and crushing. Keep all in-line connectors easily
accessible.
• The car kit is intended for use in 12 Volt negative ground
systems only. The car kit draws less than 10 Amps.
Confirm that the vehicle's electrical system can supply
this current.
Install the vehicle integration kit
The vehicle integration kit is the central connection point
for the car kit. Connections to the vehicle, microphone,
audio input device, and user interface module (UIM) are
made from the vehicle integration kit.
The vehicle integration kit should be secured to the vehicle
after the rest of the car kit components are installed and
cables are secured