Motorola 68014301013 - Manual (Page 11)

9 Installation
Install the microphone
Caution: The location of the microphone and microphone
cable must not interfere with the vehicle's air bag
deployment. In particular, side airbags located with the
windshield pillar or door jamb.
1 Mount the microphone in a suitable location using
either the screw, velcro, or clip (supplied).
• For optimal hands-free performance, mount the
microphone on the overhead console/dome light
assembly near the front center of the vehicle, away
from the window, pointed toward the driver's mouth.
• Locate the microphone no more than 16 inches (40 cm)
from the driver.
• Do not allow anything (such as a rear-view mirror or sun
visor) to block the path between the microphone and
the driver.
• Mount the microphone firmly so that vibrations do not
affect audio quality.
• Refrain from locating the microphone directly in the
path of heat/AC vents.
• Refrain from mounting the microphone on door pillars
or windows that can transmit exterior wind noise to it.
• Do not attach microphone to the vehicle's visor.
2 Route the microphone cable down the side of the
windshield, through the dash, and to the vehicle
integration kit.
3 Connect the microphone to the vehicle integration kit
connector C (shown on page 4).
Connect the ISO cable
Use the ISO cable to connect the car kit to your vehicle. It
connects the vehicle's power, ignition, and entertainment
system to the car kit.