Motorola 68014301013 - Manual (Page 10)

8 Installation
5 Connect cable connector P (shown on page 5) to the
junction box connector B (shown on page 4).
6 Place mounting nut (straight or curved) onto selected
mounting arm.
7 Push arm into mounting base, and fasten onto base
using mounting nut.
8 Slide mounting bracket onto arm.
9 Attach mounting base to flat spot location on your
vehicle.
10 Attach one side of mounting tape (supplied) to back of
mounting bracket.
11 Remove other side of mounting tape on bracket, and
press the UIM firmly into place.