Motorola Canopy Powerline MU - Manual (Page 69)

Powerline MU
Page 69 of 112
SNMP Get community string can be used to do a "get" operation on the OID's belonging
to the following groups:
whispPlvModemInfoGroup, whispPlvModemConfigGroup,
whispPlvModemTrapConfigGroup of WHISP-PLV-MODEM-MIB.
Get community string does not support "set" operation on any of the OID's belonging to
WHISP-PLV-MODEM-MIB.
SNMP Set community string can be used to do a "get" and "set" operation on the OID's
belonging to the following groups:
whispPlvModemInfoGroup, whispPlvModemConfigGroup,
whispPlvModemTrapConfigGroup of WHISP-PLV-MODEM-MIB.
SNMP Admin Community string can be used to do "get" and "set" operations on all the
OID's of WHISP-PLV-MODEM-MIB.
Following table represents the WHISP-PLV-MODEM-MIB groups and the community
strings that can be used to access them.
Access Rights using
Groups in WHISP-PLV-MODEM-MIB
Get
Community
String
Set
Community
String
Admin
Community
String
whispPlvModemInfoGroup Get Get Get
whispPlvModemConfigGroup Get Get and Set Get and Set
whispPlvModemTrapConfigGroup Get Get and Set Get and Set
whispPlvModemAdmConfigGroup No Access No Access Get and Set
whispPlvModemAdmWConfigGroup No Access No Access Get and Set
whispPlvModemAdmSnmpAcessConfigGroup No Access No Access Get and Set
SNMP Get community string can be used to do “get” operation only on all the OID’s of
RFC1213-MIB.
SNMP Set and Admin community strings configured in this page can be used to do "get"
and "set" operations on all the OID's of RFC1213-MIB.
Please note that SNMP Manager should load WHISP-GLOBAL-REG-MIB
and WHISP-TC-MIB, to use WHISP-PLV-MODEM-MIB.