Motorola Canopy Powerline MU - Manual (Page 45)

Powerline MU
Page 45 of 112
SNMP Get community string can be used to do a "get" operation on the OID's belonging to the
following groups:
whispPlvGatewayInfoGroup, whispPlvGatewayConfigGroup, whispPlvGatewayTrapConfigGroup
and whispPlvGatewayPowerlineGroup of WHISP-PLV-GATEWAY-MIB.
Get community string does not support "set" operation on any of the OID's belonging to WHISP-
PLV-GATEWAY-MIB.
SNMP Set community string can be used to do a "get" and "set" operation on the OID's belonging
to the following groups:
whispPlvGatewayInfoGroup, whispPlvGatewayConfigGroup, whispPlvGatewayTrapConfigGroup
and whispPlvGatewayPowerlineGroup of WHISP-PLV-GATEWAY-MIB.
SNMP Admin Community string can be used to do "get" and "set" operations on all the OID's of
WHISP-PLV-GATEWAY-MIB.
Following table represents the WHISP-PLV-GATEWAY-MIB groups and the community strings
that can be used to access them.
Access Rights using
Groups in WHISP-PLV-GATEWAY-MIB
Get
Community
String
Set
Community
String
Admin
Community
String
whispPlvGatewayInfoGroup Get Get Get
whispPlvGatewayConfigGroup Get Get and Set Get and Set
whispPlvGatewayTrapConfigGroup Get Get and Set Get and Set
whispPlvGatewayPowerlineGroup Get Get and Set Get and Set
whispPlvGatewayAdmConfigGroup No Access No Access Get and Set
whispPlvGatewayAdmLanConfigGroup No Access No Access Get and Set
whispPlvGatewayAdmSnmpAccessConfigGroup No Access No Access Get and Set
whispPlvGatewayAdmWanConfigGroup No Access No Access Get and Set
whispPlvGatewayAdmModemGroup No Access No Access Get and Set
SNMP Get community string can be used to do “get” operation only on all the OID’s of RFC1213-
MIB. SNMP Set and Admin community strings configured in this page can be used to do "get"
and "set" operations on all the OID's of RFC1213-MIB.
Please note that SNMP Manager should load WHISP-GLOBAL-REG-MIB
and WHISP-TC-MIB, to use WHISP-PLV-GATEWAY-MIB.