Motorola Canopy Powerline MU - Manual (Page 37)

Powerline MU
Page 37 of 112
Open your web browser and enter the following Gateway default IP address:
http://192.168.1.99.
Enter your user ID and password.
Factory-installed defaults:
User ID: admin
Password: Motorola
When you first log in the System Info screen will display.
6.1.1 User Interface Navigation tips
The user interface is divided into four main categories:
•
System: View and make changes in the system. View the system information
and logs. Set or change the time and date information, change the password,
backup the settings, reboot the system, view site information, and upgrade the
Gateway firmware.
•
Advanced: The Advanced screen gives you links for setting up a BAM
(management) server, setting up SNMP Configuration and SNMP Access
Control.
•
IP Address: Set the Gateway to obtain an IP address automatically or to use a
specific IP address.
•
Powerline: Set the bridge table timeout, view a list of modems, modem MAC
addresses, VID’s, Link Speed, set the Network Encryption Key, and change the
PSD settings.
At the top of each screen is a Home link to go back to the System Information screen and
a Logout link to log out of the Gateway.