Motorola DCT3080 - Manual (Page 71)

DCT3080 Installation Manual
65
Field Description
HDMI Port
If a device is connected to the HDMI port only, the following
diagnostics display to help troubleshoot the HDMI interface.
They all display “N/A” if no device is connected to the HDMI
port or the value is invalid or cannot be retrieved.
Device
Connected
Indicates whether a device is connected to the HDMI port —
Yes or No.
Repeater
Indicates whether the connected device is a repeater —
Yes or No.
Video Xmission
(transmission)
Indicates whether the DCT3080 is transmitting video over the
HDMI port — Not Active or Active.
HDCP Enabled
Indicates whether the DCT3080 is using HDCP to encrypt
video transmitted over the HDMI link — Yes or No. If the
Video Xmission status is Not Active, the HDCP Enabled
status is No.
Video
Constrained
Indicates whether the DCT3080 is constraining the video sent
through HDMI — Yes or No. If the Video Xmission status is
Not Active, the Video Constrained status is No.
Output Format Indicates the timing format of the video sent through HDMI:
ƒ 1920 x 1080I — 1920 pixels wide by 1080 pixels high,
interlaced
ƒ 1280 x 720P — 1280 pixels wide by 720 pixels high,
progressive
ƒ 720 x 480P — 720 pixels wide by 480 pixels high,
progressive
ƒ 720 x 480I — 720 pixels wide by 480 pixels high,
interlaced
ƒ 640 x 480P — 640 pixels wide by 480 pixels high,
progressive
Aspect Ratio
Indicates the aspect ratio of the video sent through HDMI —
3:4 or 16:9.