Motorola DCT3080 - Manual (Page 29)

DCT3080 Installation Manual
23
Connecting to a Stereo TV
Depending on the TV’s inputs:
ƒ
If possible, use the
S - VIDEO and AUDIO connectors on the DCT3080.
ƒ If the TV has no S-Video input, use the composite
VIDEO
and
AUDIO
connectors on the DCT3080.
ƒ If the TV has an RF input only, use the
RF OUT connector on the cable
terminal. The RF connection carries video and audio.
Connecting a Stereo TV
ƒ Connect an RF coaxial cable to the cable wall outlet and the
CABLE IN
connector on the cable terminal.
ƒ Connect the stereo audio cable to the
AUDIO R
and
L
connectors on
the cable terminal and the corresponding connectors on the stereo
TV.
ƒ Connect an S-video cable to the
S - VIDEO connectors on the cable
terminal and the TV. or
ƒ Connect a video cable to the
VIDEO OUT connector on the cable
terminal and the
VIDEO IN
connector on the TV. or
ƒ Connect an RF coaxial cable to the cable wall outlet and the
CABLE IN
connector on the cable terminal.
ƒ Connect an RF coaxial cable to the
RF OUT connector on the cable
terminal and the RF connector on the TV.
To connect to an audio receiver, such as a home mini system, follow a
daisy-chain convention. The A/V configuration illustrated (Figure 3-4)
enables digital stereo recording, including Dolby Surround sound. Use
only one set of RCA input connectors on the stereo: