Motorola DCT3080 - Manual (Page 67)

DCT3080 Installation Manual
61
The Code Modules fields are:
Field Description
Boot Code
The boot code version in ASCII format
Version
The firmware version and build date in ASCII format
Digital Secure
Processor
The digital secure processor version in ASCII format
Downloadable
Object
Information Table
Lists all objects loaded, or being loaded, onto the DCT3080
in ASCII format. The information displayed for each object
depends on the running environment. If a download is not
in progress, the LED displays the current environment
running and version number, as shown in Figure 4-9. On
the LED, “bPC” represents base platform or Thin Client
code.
Object
The object name
Ver
The object version
Status
The object status, updated on the OSD and LED every
5 seconds while you display the diagnostic:
OSD Status Description
MEM ALLOC Allocated Memory for object is
allocated
LOADING Loading Object is being loaded
STARTING Enabling Object is being started
(the constructor is
running)
ENABLED Enabled Object is running
ENA–NOT
RUN Enabled_Not_
Runnable Object is enabled, but
cannot run
STOPPING Disabling Object is being stopped
(the destructor is running)
DISABLED Disabled Object has been disabled
DIS-NOT
RUN Disabled_Not_
Runnable Object is disabled and
cannot run