Motorola DCT3080 - Manual (Page 53)

DCT3080 Installation Manual
47
The Out-Of-Band Status fields are:
Field Description
OOB
Frequency
Indicates the OOB tuner center frequency, from 70 to 130 MHz.
Carrier
Lock
Indicates whether the OOB receiver is locked to the carrier:
OSD LED Description
YES L Carrier locked
NO U Carrier unlocked
Data
Indicates whether data is being carried by the OOB and EMM
traffic, which is tracked separately:
OSD LED Description
YES On OOB data detected within last 5 seconds
NO Off OOB data not detected within last 5 seconds
EMM Data
Indicates whether EMM data is being carried on the OOB stream:
OSD LED Description
YES On EMM data detected within last 5 seconds
NO Off EMM data not detected within last 5 seconds
SNR
When carrier lock has been established, displays an estimate of
the carrier signal-to-noise ratio in dB, with an explanation:
ƒ GOOD — Good value
ƒ FAIR — Marginal signal level; check the signal
ƒ POOR — Unusable signal
ƒ INVALID — Invalid SNR value
AGC
When carrier lock has been established, displays an estimate of
the AGC as a percentage, with an explanation:
ƒ GOOD — Good value
ƒ FAIR — Marginal signal level; check the signal
ƒ POOR — Unusable signal
ƒ INVALID — Invalid AGC value
EMM
Provider
ID
Displays the conditional access stream for the DCT3080, in
hexadecimal