Mio MIOMAP C220 - Manual (Page 71)

6.1.4.3 Alternative speeding tolerance
If the speed limit of the current road reaches the value set at Alternative speed limit,
this setting will replace the basic one set at the top of this screen. The slider and the
selector work exactly as the basic ones described here: Page 70.
Example: to let you better understand how this feature works, here is an example. If
you use the settings +10 km/h – 100 km/h – +5%, MioMap will warn you when
driving at the following speeds:
Speed limit Warning at
40 km/h 50 km/h (=40 km/h + 10 km/h)
60 km/h 70 km/h (=60 km/h + 10 km/h)
90 km/h 100 km/h (=90 km/h + 10 km/h)
100 km/h 105 km/h (=100 km/h + 5%)
120 km/h 126 km/h (=120 km/h + 5%)
160 km/h 168 km/h (=160 km/h + 5%)
6.1.5 Enable Speed Camera Warning
MioMap contains a built-in database of known speed and red light cameras, and you
can also add further cameras you discover using the Add Cam button in the Cursor
menu (Page 30). The types and parameters of speed cameras are explained here:
Page 51.
In this section you can enable or disable the warning for known cameras, and you
can also fine-tune the way MioMap warns you when you approach one of these
cameras.
Note: Detecting the location of speed cameras may be prohibited by law in certain
countries or regions. Be sure to check if it is legal to turn on this warning or not
before doing so.
6.1.6 Speed Camera Options
When speed camera warning is turned on, the values of these controls determine
how the user will be notified when approaching a speed camera.