Matrox Electronic Systems II User Manual
Page 97
Board input and output connectors 97
Use Matrox cable DBHD44-TO-8BNC to interface with this
connector. It has eight BNC connectors and a high-density
44-pin D-Subminiature male connector. This cable allows you
to attach up to six video sources, an analog sync, and a trigger
input.
An open-ended version of this cable, the DH44-TO-8BNC/O, is
also available and can be customized to access signals in
addition to those described above. For customers planning to
build their own cable, parts can be purchased from:
2
HSYNC_TTL
Hsync input or output (TTL).
38
EXP(1)
Exposure #1 output (TTL).
23
EXP(2)
Exposure #2 output (TTL).
36
TX
Transmit (RS-232).
22
RX
Receive (RS-232).
6
CTS
CTS (RS-232).
21
RTS RTS
(RS-232).
39
USER1IN+
Auxiliary User Input #1 (positive).
12
USER1IN-
Auxiliary User Input #1 (negative).
9
USER2IN+
Auxiliary User Input #2 (positive).
10
USER2IN-
Auxiliary User Input #2 (negative).
24
USER1OUT
Auxiliary User Output #1 (TTL).
8
USER2OUT
Auxiliary User Output #2 (TTL).
1, 16
DC POWER
+12 V OR +5 V Power Supply.
7, 37
NC
Not connected on
METEOR-II/Multi-Channel.
3-5, 14,
17-18,
25-31,42
GND
Ground.
■
Manufacturer:
NorComp Interconnect Devices
■
Connector:
HDT44P
Pin
Signal
Description