Matrox Electronic Systems II - Manual (Page 91)

Board input and output connectors 91
The pinout of the auxiliary power supply input connector is as
follows:
For customers building their own cable, the part number of the
camera supply connector is as follows:
Auxiliary power supply selection
The following diagram shows the location of the auxiliary power
supply selection and their corresponding pin numbers:
Pin Description
1 +12 V
2 Ground
3 Ground
4 +5 V
■
Manufacturer: VEN
■
Connector: 2490-04PRT
pin 1 pin 2 pin 3
+5V +12V