Matrox Electronic Systems II - Manual (Page 112)

112 Appendix E: Technical information Matrox Meteor-II /1394
Auxiliary power supply input
The auxiliary power supply input is a standard 4-pin male
connector. Use the cable provided with your board to connect to
the power supply of your computer.
The pinout of the auxiliary power supply input is as follows:
The part number of the camera supply connector is as follows:
References
For further reading, consult:
Anderson, Don. FireWire System Architecture. Reading,
Massachusetts: Mindshare Inc., 1998.
Henehan, Burke. "1394 Firewire Hardware Design
Considerations." Multimedia Systems Design Mar. 1998.
(Or see http://www.msdmag.com)
Pin Description
1 +12 V
2 Ground
3 Ground
4 (not used)
■
Manufacturer: VEN
■ Connector: 2490-04PRT
4
3
2
1