English – GIGABYTE AGP 4X(1.5V) User Manual
Page 87
Technical Reference
- 83 -
English
II. Q: Why does anyone need a motherboard with DualBIOS
TM
technology?
Answer:
In today’s systems there are more and more BIOS failures. The most common reasons are
virus attacks, BIOS upgrade failures, and/or deterioration of the BIOS (ROM) chip itself.
1. New computer viruses are being found that attack and destroy the system BIOS. They
may corrupt your BIOS code, causing your PC to be unstable or even not boot normally.
2. BIOS data will be corrupted if a power loss/surge occurs, or if a user resets the system,
or if the power button is pressed during the process of performing a system BIOS
upgrade.
3. If a user mistakenly updates their mainboard with the incorrect BIOS file, then the
system may not be able to boot correctly. This may cause the PC system hang in
operation or during boot.
4. A flash ROM’s life cycle is limited according to electronic characteristics. The modern
PC utilizes the Plug and Play BIOS, and is updated regularly. If a user changes
peripherals often, there is a slight chance of damage to the flash ROM.
With Giga-Byte Technology’s patented DualBIOS
TM
technology you can reduce the
possibility of hangs during system boot up, and/or loss BIOS data due to above reasons.
This new technology will eliminate valuable system down time and costly repair bills
cause by BIOS failures.
I. Q: What is DualBIOS
TM
technology?
Answer:
DualBIOS technology is a patented technology from Giga-Byte Technology. The concept of
this technology is based on the redundancy and fault tolerance theory. DualBIOS
TM
technology
simply means there are two system BIOSes (ROM) integrated onto the motherboard. One is a
main BIOS, and the other is a backup BIOS. The mainboard will operate normally with the main
BIOS, however, if the main BIOS is corrupt or damaged for various reasons, the backup BIOS
will be automatically used when the system powered-On. Your PC will operate as before the main
BIOS was damaged, and is completely transparent to the user.