English – GIGABYTE AGP 4X(1.5V) User Manual

Page 18

- 14 -

GA-8PE667 Ultra2 / Pro Motherboard

English

The motherboard has 3 dual inline memory module (DIMM) sockets, but it can only support a maxi-
mum of 4 banks of DDR memory. DDR sockets 1 uses 2 banks, DDR sockets 2&3 share the remain-
ing 2 banks. Please refer to the following tables for possible memory configurations supported. The
BIOS will automatically detects memory type and size. To install the memory module, just push it
vertically into the DIMM socket .The DIMM module can only fit in one direction due to the notch.
Memory size can vary between sockets.

Step 2: Install memory modules

DDR

Notch

D:Double Sided DIMM S:Single Sided DIMM
X:Not Use

DDR1

DDR2

DDR3

Before installing the processor and heatsink, adhere to the following warning:
When DIMM LED is ON, do not install/remove DIMM from socket.
Please note that the DIMM module can only fit in one direction due to the one notches.
Wrong orientation will cause improper installation. Please change the insert orientation.

Support Unbuffered DDR DIMM Sizes type:
64 Mbit (2Mx8x4 banks)

64 Mbit (1Mx16x4 banks)

128 Mbit(4Mx8x4 banks)

128 Mbit(2Mx16x4 banks)

256 Mbit(8Mx8x4 banks)

256 Mbit(4Mx16x4 banks)

512 Mbit(16Mx8x4 banks)

512 Mbit(8Mx16x4 banks)

Total System Memory (Max2GB)