GIGABYTE AGP 4X(1.5V) - Manual (Page 59)

BIOS Setup
- 55 -
English
Frequency/Voltage Control
Figure 8: Frequency/Voltage Control
CMOS Setup Utility-Copyright (C) 1984-2002 Award Software
Frequency/Voltage Control
CPU Clock Ratio [ 15X] Item Help
CPU Host Clock Control [Disable] Menu Level
X
Ú
CPU Host Frequency(MHz) 100
Ú
Fixed PCI/AGP Frequency 33/66
Host/DRAM Clock ratio [Auto]
Memory Frequency(MHz) 266
PCI/AGP Frequency(MHz) 33/66
DIMM OverVoltage Control [Normal]
AGP OverVoltage Control [Normal]
CPU Voltage Control [Normal]
Normal CPU Vcore 1.5V
KLJI
: Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F3:Language F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
& & & & & CPU Clock Ratio
This setup option will automatically assign by CPU detection.
For Willamette CPU:
8X~23X default: 14X
For C-Stepping P4:
8X,10X~24X default: 15X
For Northwood CPU:
12X~24X default: 16X
The option will display “Locked” and read only if the CPU ratio is not changeable.
) ) ) ) )CPU Host Clock Control
Note: If system hangs up before enter CMOS setup utility, wait for 20 sec for times out reboot . When
time out occur, system will reset and run at CPU default Host clock at next boot.
Disable Disable CPU Host Clock Control.(Default value)
Enable Enable CPU Host Clock Control.
Ú Those items will be available when "CPU Host Clock Control" is set to Enabled.