English – GIGABYTE AGP 4X(1.5V) User Manual
Page 49
BIOS Setup
- 45 -
English
)
)
)
)
)USB Mouse Support
Enabled
Enabled USB Mouse Support.
Disabled
Disabled USB Mouse Support. (Default value)
)
)
)
)
)AC97 Audio
Auto
BIOS will automatically detect onboard AC97 Audio. (Default value)
Disabled
Disabled AC97 Audio.
)
)
)
)
)Onboard H/W SATA **
0
Disable this option if you are not using the onboard Serial ATA feature.
Enabled
Enabled Onboard H/W Serial ATA support.(Default value)
Disabled
Disabled Onboard H/W Serial ATA
.
)
)
)
)
)Serial ATA Function **
RAID
Select onboard Serial ATA chip function as RAID.(Default value)
BASE
Select onboard Serial ATA chip function as BASE.
)
)
)
)
)Onboard ATA/RAID Device **(For IDE3/4)
0
0
0
0
0
If you don't set any HDD Device in IDE3 or 4 but enable the function, the normal
message "MBUltra133 BIOS is not installed becasue there are no drives attached" will
come out.
Ignore this message or set the option disable to make the message disappear.
Enable
Enabled onboard ATA/RAID function.(Default value)
Disable
Disabled this function.
)
)
)
)
)RAID Controller Function **(For IDE3/4)
0
Select onboard IDE RAID chip function as ATA or RAID.
ATA
Enabled ATA
function.(Default value)
RAID
Enabled RAID function.
)
)
)
)
)Onboard H/W LAN
Enable
Enabled onboard LAN function.(Default value)
Disable
Disable onboard LAN function.
** For GA-8PE667 Ultra2 Only