English – GIGABYTE AGP 4X(1.5V) User Manual
Page 50
- 46 -
GA-8PE667 Ultra2 / Pro Motherboard
English
)
)
)
)
)Onboard LAN Boot ROM
0
The function is to invoke onboard LAN chip to boot up the system
Enable
Enable onboard LAN boot ROM function.
Disable
Disable this function. (Default value)
)
)
)
)
)Onboard Serial Port 1
Auto
BIOS will automatically setup the port 1 address.
3F8/IRQ4
Enable onboard Serial port 1 and address is 3F8. (Default value)
2F8/IRQ3
Enable onboard Serial port 1 and address is 2F8.
3E8/IRQ4
Enable onboard Serial port 1 and address is 3E8.
2E8/IRQ3
Enable onboard Serial port 1 and address is 2E8.
Disabled
Disable onboard Serial port 1.
)
)
)
)
)Onboard Serial Port 2
Auto
BIOS will automatically setup the port 2 address.
3F8/IRQ4
Enable onboard Serial port 2 and address is 3F8.
2F8/IRQ3
Enable onboard Serial port 2 and address is 2F8. (Default Value)
3E8/IRQ4
Enable onboard Serial port 2 and address is 3E8.
2E8/IRQ3
Enable onboard Serial port 2 and address is 2E8.
Disabled
Disable onboard Serial port 2.
)
)
)
)
)UART Mode Select
0
This feature allows you to determine which Infra Red(IR) function of Onboard I/O chip)
ASKIR
Using as IR and set to ASKIR Mode.
IrDA
Using as IR and set to IrDA Mode.
Normal
Using as standard serial port. (Default Value)
SCR
Using as smart card Interface
.
)
)
)
)
)UR2 Duplex Mode
(When UART Mode Select is set [ASKIR or IrDA or SCR])
0
This feature allows you to select the IR modes.
Half
IR Function Duplex Half. (Default Value)
Full
IR Function Duplex Full.