English – GIGABYTE AGP 4X(1.5V) User Manual
Page 48
- 44 -
GA-8PE667 Ultra2 / Pro Motherboard
English
)
)
)
)
)On-Chip Primary PCI IDE
0
When enabled, allows you to use the onboard primary PCI IDE. If a hard disk controller card is
used, set at Disabled.
Enabled
Enable onboard 1st channel IDE port. (Default value)
Disabled
Disable onboard 1st channel IDE port.
)
)
)
)
)On-Chip Secondary PCI IDE
0
When enabled, allows you to use the onboard secondary PCI IDE. If a hard disk controller card
is used, set at Disabled.
Enabled
Enable onboard 2nd channel IDE port. (Default value)
Disabled
Disable onboard 2nd channel IDE port.
)
)
)
)
)IDE1 Conductor Cable
Auto
W ill be automatically detected by BIOS (Default Value)
ATA66/100
Set IDE1 Conductor Cable to ATA66/100 (Please make sure your IDE device and cable
is compatible with ATA66/100)
ATA33
Set IDE1 Conductor Cable to ATA33 (Please make sure your IDE device and cable is
compatible with ATA33)
)
)
)
)
)IDE2 Conductor Cable
Auto
W ill be automatically detected by BIOS (Default Value)
ATA66/100
Set IDE2 Conductor Cable to ATA66/100 (Please make sure your IDE device and cable
is compatible with ATA66/100)
ATA33
Set IDE2 Conductor Cable to ATA33 (Please make sure your IDE device and cable is
compatible with ATA33).
)
)
)
)
)USB Controller
0
Disable this option if you are not using the onboard USB feature.
Enabled
Enabled USB Controller. (Default value)
Disabled
Disabled USB Controller.
)
)
)
)
)USB Keyboard Support
0
When a USB keyboard is installed, please set at Enabled.
Enabled
Enabled USB Keyboard Support.
Disabled
Disabled USB Keyboard Support.
(Default value)