GE Monogram Security Legend Camera User Manual

Page 2

Copyright

This document may not be copied in whole or in part, or otherwise reproduced except as

specifically permitted under US copyright law, without the prior written consent from GE.

Document number/revision: 1052027A.

Disclaimer

The information in this document is subject to change without notice. GE, in keeping pace with

technological advances, is a company of product innovation. Therefore, it is difficult to ensure

that all information provided is entirely accurate and up-to-date. GE accepts no responsibility

for inaccuracies or omissions and specifically disclaims any liabilities, losses, or risks, personal

or otherwise, incurred as a consequence, directly or indirectly, of the use or application of any

of the contents of this document.

This publication may contain examples of screen captures and reports used in daily operations.

Examples may include fictitious names of individuals and companies. Any similarity to names

and addresses of actual businesses or persons is entirely coincidental.

Trademarks and patents

Legend product and logo are trademarks of GE Security.

GE and the GE monogram are registered trademarks of General Electric.

Other trade names used in this document may be trademarks or registered trademarks of the

manufacturers or vendors of the respective products.

Software license agreement

GE software supplied with GE products is proprietary and furnished under license and can be

used or copied only in accordance with the license terms.

THE ENCLOSED PROGRAM IS FURNISHED SUBJECT TO THE TERMS AND CONDITIONS OF THIS

AGREEMENT. RETENTION OF THE PROGRAM FOR MORE THAN 30 DAYS, OPENING OF THE

SEALED WRAPPER, IF ANY, SURROUNDING THE PROGRAM, OR USE OF THE PROGRAM IN ANY

MANNER WILL BE CONSIDERED ACCEPTANCE OF THE AGREEMENT TERMS. IF THESE TERMS ARE

NOT ACCEPTABLE, RETURN THE UNUSED PROGRAM AND ANY ACCOMPANYING DOCUMENTATION

TO GE FOR A FULL REFUND OF THE LICENSE FEE PAID. (FOR INFORMATION REGARDING THE

RETURN OF PROGRAMS ENCODED OR INCORPORATED WITHIN EQUIPMENT, CONTACT THE

NEAREST GE SALES OFFICE.)

Intended use

Use this product only for the purpose for which it was designed; refer to the data sheet and user

documentation. For the latest product information, contact your GE sales representative or visit

us online at www.gesecurity.com.

FCC compliance

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications.

You are cautioned that any changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to operate the equipment.

Contact

Direct all inquiries about GE’s legal policies with regard to this product to:

Director of Legal Services

GE Security

12345 SW Leveton Drive

Tualatin, OR 97062-9938 USA