Grizzly G0649 - Manual (Page 18)

-16-
g0649 Welding downdraft table
SEcTiOn 4: OPERATiOnS
General Operation
this welding downdraft table is not designed
as a substitute for a respirator or fresh-air type
respirator. Make sure that you are familiar with
the materials to be welded and know what types
of fumes are produced. often common metals
are coated with coatings that produce poisonous
fumes when heated. Before welding or cutting,
make sure to strip coatings off at least four inches
away from the area of heat application.
during your welding job, periodically pay attention
to the CFM and manometer and clean out the
slag drawer. Should the type of welding you do
change drastically or if heavy smoking of paint,
rubberized undercoating, or coatings of unknown
material cause excessive smoke, you may have
to readjust the EXhauSting tiME and FiltEr
rolling tiME so an adequate CFM can be
maintained.
it is always better to follow good welding practices
and remove coatings that will smoke and possibly
contaminate the weld. this machine does not
save you from the task of proper workpiece
preparation.
this machine is not designed to collect smoke
that contains burning slag or liquefied metal
from a cutting torch or a plasma cutter. in these
circumstances, you must use the appropriate
welding downdraft table that will arrest the molten
metal and slag.
To use the machine:
1. refer to control Panels on Page 17 for
detailed control panel functions.
2. Connect the machine to power.
3. position your workpiece, and use the lock
levers to hold it in place.
Damage to your eyes and lungs could result
from using this machine without proper pro-
tective gear. Always wear the appropriate
respirator and welding helmet fitted with the
correct type of eye protection when welding
and operating this machine.
Operation Safety
NOTICE
if you have never used this type of machine
or equipment before, WE STROnGLy REc-
OMMEnD that you read books, trade maga-
zines, or get formal training before begin-
ning any projects. Regardless of the con-
tent in this section, Grizzly industrial will
not be held liable for accidents caused by
lack of training.
Loose hair, clothing, or
jewelry could get caught
in machinery and cause
serious personal injury.
Keep these items away
from moving parts at all
times to reduce this risk.
To reduce the risk of
serious injury when using
this machine, read and
understand this entire
manual before beginning
any operations.