Gateway none - Manual (Page 55)

4.3.6.2 Encryption
If you are transmitting sensitive data across wireless chan-
nels, you should enable encryption. Encryption requires you
to use the same set of encryption/decryption keys for the
Gateway and all of your wireless clients. However, please
aware that the extra processing time required for encryption
may affect the throughput for wireless communications.
You can automatically generate encryption keys by entering
a pass phrase that will be used to create four keys as shown
below, or you can manually enter the keys. To manually
configure the keys, enter five hexadecimal pairs for each
key. (A hexadecimal digit is a number or letter in the range
0-9 or A-F.)
4-19
CHAPTER 4