Gateway none - Manual (Page 43)

4-7
CHAPTER 4
4.3.1 Change Password
Use this menu to restrict management access based on a
specific password. Anyone can access the Status and Help
menus, but you must enter the user name "Admin" and a
password to access the configuration options provided by
the Setup and Tools menus.
By default, there is no password, so please assign a pass-
word to the Administrator as soon as possible, and store it
in a safe place.
Passwords can contain from 3-12 alphanumeric characters,
and are not case sensitive.
Note:If your password is lost, or you cannot gain access to
the management interface, press the Reset button on
the front panel (holding it down for at least five sec-
onds) to restore the factory defaults.