Gateway none - Manual (Page 38)

4-2
CHAPTER 4
4.1 Navigating the Web Browser Interface
The Gateway's management interface includes four key
menus: Status, Help, Tools, and Setup.
The Status and Help menus provide general information on
the current settings and how to configure the Gateway.
The Setup menu is used to configure the LAN, WAN and
wireless interface, as well as other advanced functions.
While the Tools menu is used to reset the Gateway, restore
the factory settings, or upgrade firmware.
4.1.1 Setting a Password
If this is your first time to access the Gateway, you should
define a new Administrator password, record it and put it in
a safe place. From the Main Menu, select "Setup" and enter
the default password for the Administrator (i.e., "admin").
Then select "Change Password" and follow the instructions
on the screen (see Section 4.3.1 "Change Password"). Note
that passwords can consist of 3 to 12 alphanumeric charac-
ters and are not case sensitive.