Gateway none - Manual (Page 46)

4-10
CHAPTER 4
4.3.4 WAN Configuration
Specify the WAN connection type required by your Internet
Service Provider, then click "More Configuration" to pro-
vide detail configuration parameters for the selected connec-
tion type. Specify one of the first three options to configure
a WAN connection through the RJ-45 port (i.e., a connec-
tion to an xDSL modem or Cable modem). Specify the
"Dial-up on Demand" option to configure a WAN connec-
tion through the serial port (i.e., a connection to an ISDN
TA or PSTN modem).
Note:If WAN connections are configured for both the RJ-
45 and serial port, the serial port will be used as a
backup Internet connection if the primary RJ-45 WAN
connection fails.