User instructions, Pebble layout – Stovax E-Studio PR0776 User Manual
Page 8
8
14
AR1364
• Place 2 medium-size coals either side of the first large
coal, in the recess between the flame baffle and the front
coal, Diagram 15.
15
AR1365
•
Place another two medium size coals behind the first three
coals and against the flame baffle, Diagram 16.
16
AR1366
• Place a small coal directly behind the first large coal, and
in between the centre of the last two medium coals resting
on the flame baffle, Diagram 17.
17
AR1367
• Place the last two small coals to the left and right-hand
side of the bed in the two spaces, Diagram 18.
18
AR1368
PEBBlE lAYOUT
• Position the pebble flame baffle centrally on the tray and
ensure the stepped lower edge engages against the rear
edge of the burner skin, Diagram 19.
19
AR1406
• Place the front pebble piece centrally in the channel at
the front of the tray. See Diagram 20.
20
AR1407
6.6 There are 10 loose pebbles in the set supplied. Each pebble
is individually marked. The quantity of each type is shown
below.
A1 x 3
A4 x 1
A2 x 1
A5 x 1
A3 x 3
A6 x1
• Place the four pebbles as identified resting between the
front ceramic and the flame baffle as shown in diagram 21.
USER INSTRUCTIONS