Stovax E-Studio PR0776 - Manual (Page 14)

14
INSTAllATION INSTRUCTIONS
SITE REQUIREMENTS
1. FlUE AND ChIMNEY REQUIREMENTS
NOTE: This appliance can only be installed in
conjunction with the flue supplied.
1.1 The flue must be sited in accordance with BS5440: Part 1
(latest edition), Diagram 1.
1.2 Any terminal which is less than 2 metres above any access
(level ground, balcony or above a flat roof to which people
have access) is to be fitted with a guard.
1.3 The flue must be securely fixed and fire precautions
followed in accordance with local and national codes of
practice.
1.4 The horizontal terminal can be reduced in length, Diagram
2.
2
AR0630
1
* In addition, the terminal should not be nearer than
300mm to an opening in the building fabric formed for the
purpose of accommodating a built-in element such as a
window frame.
H The reference to external corners does not apply to
building protrusions not exceeding 450mm, such as disused
chimneys on external walls.
Dimension Terminal Position Minimum
Distance
(mm)
A* Directly below an opening, air brick, opening widows etc 300 mm
B* Above an opening, air brick, opening windows etc. 300 mm
C* Horizontal to an opening, air brick, opening windows etc. 300 mm
D Below gutters, soil pipes or drain pipes 300 mm
E Below eaves 300 mm
F Below balconies or car port roof 600 mm
G From a vertical drain pipe or soil pipe 300 mm
H From an internal or external corner 600 mm
I Above ground, roof or balcony level 300 mm
J From a surface facing the terminal (or boundary) 600 mm
K From a terminal facing the terminal 600 mm
L From an opening in the car port (e.g. door, window) into dwelling 1200 mm
M Vertically from a terminal on the same wall 1500 mm
N Horizontally from a terminal on the same wall 300 mm
O From the wall in which the terminal is mounted N/A
P From a vertical structure on the roof N/A
Q Above intersection with roof N/A
UK Dimensions