Stovax E-Studio PR0776 - Manual (Page 6)

6
6A. ARRANGEMENT OF ThE
FUEl BED COMPONENTS - E STUDIO
ONlY USE ThE CORRECT TYPE AND QUANTITY OF GRANITE
ChIPPINGS. AlwAYS FOllOw ThE FUEl BED lAYOUT AS
STATED IN ThESE INSTRUCTIONS. NEvER ChANGE ThE
lAYOUT FROM ThAT ShOwN hERE.
6.1 • Arrange the granite chippings in the areas highlighted in
Diagram 4. Granite chippings should be evenly distributed.
4
AR1997
• Lean the granite chippings against the burner ledges to
disguise the ledges, Diagram 5
5
AR1769
5
• Check that the port area. Arrow A, Diagram 6 is clear of
granite chippings. This can be easily done by gently running
a screwdriver or similar object along this area.
NOTE: IT IS IMPORTANT ThE GRANITE ChIPPINGS DO
NOT COvER ThE PORT AREA IN BETwEEN ThE
BURNER lEDGES.
5
AR1997
6
A
• Ensure that no chippings overhang or fill the pilot area,
Arrow B, Diagram 7.
NOTE: ChIPPINGS ShOUlD NOT BE PlACED DIRECTlY
IN FRONT OF ThE PIlOT CROSS lIGhTING FlAME.
5
AR1998
7
B
B
FITTING ThE GlASS wINDOw - E-STUDIO
6.2 • Ensure that the fibre glass window seal on the box is
intact
• Replace the one-piece glass window frame, ensuring that
all 8 fixings are tight, Diagram 8.
5
AR1996
8
NEvER OPERATE ThE FIRE whEN ThE GlASS PANEl IS
REMOvED OR BROKEN
USER INSTRUCTIONS