Grizzly G0651 - Manual (Page 35)

model g0651/g0652 (mfg. since 1/10)
-33-
SEcTION 4: OpERATIONS
Basic controls
ON/OFF Switch: starts and stops motor.
Switch Disabling Lock: this feature disables the
switch to prevent accidental startup.
Damage to your eyes, lungs, and ears could
result from using this machine without
proper protective gear. Always wear safety
glasses, a respirator, and hearing protection
when operating this machine.
NOTICE
If you have never used this type of machine
or equipment before, WE STRONGLy REc-
OMMEND that you read books, review
industry trade magazines, or get formal
training before beginning any projects.
Regardless of the content in this section,
Grizzly Industrial will not be held liable for
accidents caused by lack of training.
Loose hair, clothing, or
jewelry could get caught
in machinery and cause
serious personal injury.
Keep these items away
from moving parts at all
times to reduce this risk.
Figure 36. switch disabled.
H]V[i
EVYadX`
DC $ HI6GI
7jiidc
D;; $ HIDE
EVYYaZ
Figure 37. Basic table saw controls.
Blade tilt
handwheel
Blade height
handwheel
Blade height
lock
Blade tilt
lock
digital
readout
Fence
lock
Blade height Lock: locks the blade height.
Blade height handwheel: adjusts blade height.
Digital Readout: displays blade tilt. Note: The
readout must be recalibrated (see
Page 79) if the
power is disconnected.
Blade Tilt Lock: locks blade tilt angle.
Blade Tilt handwheel: adjusts the blade angle.
Fence Lock: locks and unlocks fence position.
Keep the blade guard in
the down position at all
times. Failure to do this
could result in serious
personal injury or death.