FIC A360 - Manual (Page 53)

Installation and Upgrade
5. Release seven screws as shown in the picture below, and then remove heat sink plate by
slightly lifting it up.
screws
Figure 2-5 Remove heat sink plate
6. Use a flat screw driver and insert it into the CPU socket and tilt it towards in front of you
to unlock CPU from the socket. It’s recommended to use the protective tooling securing
CPU against damage.
Insert flat screw driver into
the CPU socket. To unlock
CPU, Tilt it in front of you.
CPU Protective
Tooling
Figure 2-6 Remove CPU
2-14 FIC A360 Service Manual