FIC A360 - Manual (Page 35)

Outline of the A360
1-24 FIC A360 Service Manual
„ LCD Panel View Expansion-
„ Silent Boot – Select boot screen during POST.
„ Frame Buffer Size – Allows you to select sharing VGA memory size from
SDRAM. If you want to play DVD with Power DVD, please set the size of VGA
frame buffer size to 16MB or 32MB and enable Hardware accelerator function
under Power DVD.
„ I/O Device Configuration – Lets you configure input/output device such
as Serial Port, Parallel Port, and Floppy disk controller.
P h o e n i x B I O S S e t u p U t i l i t y
Advanced
I/O Device Configuration Item Specific Help
Configure serial port
Serial port A: [ Enabled ] using options:
Base I/O address [3F8 IRQ4]
Infrared port: [Enabled] [Disabled]
Mode: [IrDA] No configuration
Base I/O address [2F8 IRQ3]
Parallel port: [Enabled] [Enabled]
Mode: [EPP] User configuration
Base I/O address [378]
Floppy disk controller: [Enabled] [Auto]
BIOS or OS chooses
configuration
F1 Help K‚ Select Item -/+ Change Values F9 Setup Defaults
Esc Exit st Select Menu Enter Select Sub-Menu F10 Save and Exit
Figure 1-16 I/O Device Configuration Sub-Menu
Serial port A [Disabled] / [Auto] /
[Enabled] Configure serial port A using options:
Disabled - No configuration,
Enabled - User configuration,
Auto - BIOS or OS configuration.
Base I/O address [3F8 IRQ4] / [2F8 IRQ3] /
[3E8 IRQ4] / [2E8 IRQ3] Set the base I/O address for serial port A.
Infrared port [Disabled] / [Auto] /
[Enabled] Configure Infrared port using options:
Disabled - No configuration,
Enabled - User configuration,
Auto - BIOS or OS configuration.
Mode [IrDA] Set the mode for Infrared port
Base I/O address [3F8 IRQ4] / [2F8 IRQ3] /
[3E8 IRQ4] / [2E8 IRQ3] Set the base I/O address for Infrared port.
Formatiert
Gelöscht:
<#>Local BUS IDE
adapter – Enable the integrated local bus
IDE adapter.¶