FUJITSU DISK DRIVES MHM215OAT - Manual (Page 35)

Device Configuration
2-4 C141-E104-02EN
2.2 System Configuration
2.2.1 ATA interface
Figures 2.3 and 2.4 show the ATA interface system configuration. The drive has a
44pin PC AT interface connector and supports PIO mode 4 transfer at 16.6 MB/s,
Multiword DMA mode 2 transfer at 16.6 MB/s and also U-DMA mode 4 transfer
at 66.6 MB/s.
2.2.2 1 drive connection
MHC2032AT
MHC2040AT
Figure 2.3 1 drive system configuration
2.2.3 2 drives connection
MHC2032AT
MHC2040AT
MHC2032AT
MHC2040AT
(Host adaptor)
Note:
When the drive that is not conformed to ATA is connected to the disk drive above
configuration, the operation is not guaranteed.
Figure 2.4 2 drives configuration
MHG2102AT
MHH2064AT
MHH2032AT
MHL2300AT
MHM2200AT
MHM2150AT
MHM2100AT
MHL2300AT
MHM2200AT
MHM2150AT
MHM2100AT
MHL2300AT
MHM2200AT
MHM2150AT
MHM2100AT