FUJITSU DISK DRIVES MHM215OAT - Manual (Page 126)

5.3 Host Commands
C141-E104-02EN 5-49
If this command is accepted in the Set Max Unlocked state, the device terminates
normally.
The READ NATIVE MAX ADDRESS command is not executed just before this
command. The command is the SET MAX ADDRESS command if it is the
command just after the READ NATIVE MAX ADDRESS command is executed.
If the device is in the Set Max Locked or Set Max Freeze Locked state:
51h, 04h: ABORTED command
At command issuance (I/O registers setting contents)
1F7
H
(CM) 1 1 1 1 1 0 0 1
1F6
H
(DH) x L x DV xx
1F5
H
(CH)
1F4
H
(CL)
1F3
H
(SN)
xx
xx
xx
1F2
H
(SC) xx
1F1
H
(FR) 03
At command completion (I/O registers contents to be read)
1F7
H
(ST) Status information
1F6
H
(DH)
1F5
H
(CH)
1F4
H
(CL)
1F3
H
(SN)
1F2
H
(SC)
xx
xx
xx
xx
xx
1F1
H
(ER) Error information
•
SET MAX FREEZE LOCK (FR=04h)
After the device made a transition to the Set Max Freeze Lock state, the following
commands are rejected, then the device returns command aborted:
−
SET MAX ADDRESS
−
SET MAX SET PASSWORD
−
SET MAX LOCK
−
SET MAX UNLOCK