FUJITSU DISK DRIVES MHM215OAT User Manual
Page 114

5.3 Host Commands
C141-E104-02EN
5-37
Table 5.4 Information to be read by IDENTIFY DEVICE command (6 of 8)
Bit 5:
'1' = Supports the Power-Up In Standby set.
Bit 4:
'1' = Supports the Removable Media Status Notification feature
set.
Bit 3:
'1' = Supports the Advanced Power Management feature set.
Bit 2:
'1' = Supports the CFA (Compact Flash Association) feature set.
Bit 1:
'1' = Supports the READ/WRITE DMA QUEUED command.
Bit 0:
'1' = Supports the DOWNLOAD MICROCODE command.
*12 WORD 85
Bit 15:
Undefined.
Bit 14:
'1' = Enables the NOP command.
Bit 13:
'1' = Enables the READ BUFFER command.
Bit 12:
'1' = Enables the WRITE BUFFER command.
Bit 11:
Undefined.
Bit 10:
'1' = Enables the Host Protected Area function.
Bit 9:
'1' = Enables the DEVICE RESET command.
Bit 8:
'1' = Enables the SERVICE interrupt.
Bit 7:
'1' = Enables the release interrupt.
Bit 6:
'1' = Enables the read cache function.
Bit 5:
'1' = Enables the write cache function.
Bit 4:
'1' = Enables the P PACKET command set.
Bit 3:
'1' = Enables the Power Management function.
Bit 2:
'1' = Enables the Removable Media function.
Bit 1:
'1' = Enables the Security Mode function.
Bit 0:
'1' = Enables the SMART function.
*13 WORD 86
Bits 15-7: '1' = Reserved
Bit 6:
Same definition as WORD 83.
Bit 5
Enables the Power-Up In Standby function.
Bit 4:
'1' = Enables the Removable Media Status Notification function.
Bit 3:
'1' = Enables the Advanced Power Management function.