FUJITSU DISK DRIVES MHM215OAT - Manual (Page 21)

Contents
xvi C141-E104-02EN
Table 4.1 Self-calibration execution timechart 4-10
Table 4.2 Write precompensation algorithm 4-11
Table 5.1 Signal assignment on the interface connector 5-3
Table 5.2 I/O registers 5-7
Table 5.3 Command code and parameters 5-14
Table 5.4 Information to be read by IDENTIFY DEVICE command 5-32
Table 5.5 Features register values and settable modes 5-41
Table 5.6 Diagnostic code 5-52
Table 5.7 Features Register values (subcommands) and functions 5-64
Table 5.8 Format of device attribute value data 5-68
Table 5.9 Format of insurance failure threshold value data 5-68
Table 5.10 SMART error log data format 5-72
Table 5.11 SMART self test log data format 5-74
Table 5.12 Contents of security password 5-76
Table 5.13 Contents of SECURITY SET PASSWORD data 5-80
Table 5.14 Relationship between combination of Identifier and Security level,
and operation of the lock function 5-80
Table 5.15 Command code and parameters 5-83
Table 5.16 Parallel generation equation of CRC polynomial 5-105
Table 5.17 Recommended series termination for Ultra DMA 5-106
Table 5.18 Ultra DMA data burst timing requirements 5-111
Table 6.1 Default parameters 6-7