FUJITSU BS2000 - Manual (Page 35)

34
FibreCat CX400, CX600
FibreCat CX500, CX700
FibreCat CX3
Symmetrix DMX800, DMX801
Symmetrix DMX-3 950
*2 DMX-3 and DMX-4 requires X2000 V3.0A07.
4.4.2 Discontinued support
- none –
4.5 Magnetic tape devices
4.5.1
Supported magnetic tape devices
Magnetic tape devices are supported in OSD/XC V2.2A on SX-servers
via channel (not on servers of the SX100 series server), fibre
channel or SCSI according to the following list.
MT cartridge systems via channel (SX130, SX140, SX150):
- 3590-A01/-A02, B02/-B04, -D31, -D32, -D41, -D42
3590-A10, -A20, -B20, -B40, -C10, -C11, -C22
via channel type 2 or channel type S, but only
on special release.
- Magstar 3591-B -BU -E via 3971 channel adapter on channel
type S
- Magstar 3591-EFx via fibre channel
- 3588-M1 -M2 (channel type 2), but only on special release
MT subsystems (SX130, SX140, SX150):
3517-3/3527-3 via channel type 2 on special release
3519-3/3529 via channel type 2 on special release
MT cartridge systems via fibre channel (SX130, SX140, SX150)
- Magstar 3591-EFx
MTC autochanger:
SX100:
- SXFCTX24-112-L2H: FibreCAT TX24 with LTO2-drives via
SCSI-LVD on controller SX70F-CS12 (integrated in the basic
model for new shipments)
- SXFCTX24-112-L3F: FibreCAT TX24 (LTO3) via fibre channel
- SX9084-110 (LTO1), SX9084-110-L2 (LTO2) via SCSI-LVD on
controller SX70F-CS10
SX130:
SX9084-110 (LTO1) via SCSI-LVD on controller SX70F-CS10
SX140:
- SXFCTX24-112-L2H: FibreCAT TX24 (LTO2) via SCSI-LVD on
controller SX70F-CS12
- SXFCTX24-112-L3F: FibreCAT TX24 (LTO3) via fibre channel
- SX9084-110 (LTO1), SX9084-110-L2 (LTO2) via SCSI-LVD on
controller SX70F-CS10