FUJITSU BS2000 - Manual (Page 21)

20
3 Technical information
3.1 Resource requirements
3.1.1
Main memory
As of X2000 V3.0A the system fixes a model dependent minimal size
of the X2000-/Solaris-memory:
SX100-B: 512MB
SX100-B with fibre channel: 1024MB
SX100-C: 1024MB
SX130-10A up to -30C: 1024MB
SX130-40C up to -60C: 2048MB
SX140 up to -20C 1024MB
SX140 as of -30C 2048MB
SX150 up to -50C 2048MB
SX150 60C 3072MB
The recommended amount of main memory that is generally also suffi-
cient for VM2000 operation can be found in section 4.1.1.
A certain part of the BS2000 memory is occupied by the HSA, whose
size depends on the configuration and the model (e.g. from the num-
ber of guest systems and processors).
It is recommended to use the software caching product DAB on an
SX100 series server configuration that only has internal disks.
Recommended read cache size: 500 MB.
3.1.2 Disk storage
The SOLIS2 package for the entire OSD Extended Software Configura-
tion requires approximately 700.000 PAM-Pages. The space needed for
the system files (PAGING area, TSOS-CAT, CONSLOG, SERSLOG, etc.)
must also be taken into account.
3.2 Software-Configuration
Produkts contained in the OSD Extended Configuration are shown in
the following table:
Produkt Version
-------------------------------
ARCHIVE V8.0
BS2000/OSD-BC V6.0
CRTE V2.6
*2 EDT V17.0
HSMS V8.0
JV V14.0
LMS V3.3
ONETSERV V3.2
PERCON V2.9
RSO V3.5
SCA V15.0
SORT V7.9
TIAM V13.1