Frymaster H50 Series - Manual (Page 89)

2-26
2.11.2 Filter Magic II Square Drain Components, Non-Standard Configurations (Units Built
after 03/01/01)
1
2
3
5
4
6
7
8
9
11
14
15
16
17
12
13
18
19
20
10
21
22
23
24
25
ITEM PART # COMPONENT
1 806-6374 Clamp Assembly
2 816-0420 Boot (Connection Seal)
3 KIT-0257SP Clamp Assembly and Boot Kit (contains 2 of Item 1 and 1 of Item 2)
4 816-0123 Cap, Square Drain End
5 KIT-0256SP Kit, Square Drain End Cap (contains 1 each of Items 1 and 4)
6 816-0021 Gasket, Cleanout
7 826-1348 Cover, Cleanout (Pkg. of 5)
8 826-1382 Wing Nut, Cleanout Cover Retaining (Pkg. of 10)
9 823-1701 Drain Tube, 15” Long, Open Both Ends
10 823-2128 Drain Tube, 8.3” Long, Open at Both Ends
11 823-1697 Swivel Drain Receiver, Filter Left of Fryer
12 823-1698 Swivel Drain Receiver, Filter Right of Fryer
13 823-1702 Drain Tube, 8.3” Long, Left End Closed
14 823-1091 Drain Outlet, Swivel
15 810-0388 Knob, Clamping
16 809-0115 Screw, 10–32
17 816-0083 O-Ring, 2.5” ID
18 816-0124 Washer, Fiber
19 826-1345 Washer, Drain Tube Retaining (Pkg. of 25)
20 809-0347 Nut, Drain Tube Retaining
21 823-2225 Drain Section, Dual Vat, 11.55” Long
22 823-3755 Drain Elbow, Full Vat Left or Right, 13.8” Long
23 823-3052 Drain Elbow, Dual Vat Left or Right, 9.7” Long
24 823-2221 Drain End, Dual Vat Left or Right
25 823-2212 Drain Section, Dual Vat Left or Right