Fluke 5020A User Manual
Page 88
5020A
Users Manual
6-18
The RHUMidity suffix,
the upper humidity alarm is enabled. A value of 0 is returned if the upper humidity alarm
is disabled.
ALARm:RHUMidity
Sets the state of the upper humidity alarm enable for the specified channel.
Example: ALAR:RHUM1:UPP:ENAB 1
The RHUMidity suffix,
turns the upper humidity alarm on (1 or ON) or off (0 or OFF). This command may be
password protected (see Password Commands).
ALARm:RHUMidity
Returns the upper humidity alarm limit for the specified channel in %RH.
Example: ALAR:RHUM1:UPP:LIM?
Response: 70.00
The RHUMidity suffix,
or DEF parameter returns the minimum, maximum, or default value respectively.
ALARm:RHUMidity
Sets the upper humidity alarm limit for the specified channel in %RH.
Example: ALAR:RHUM1:UPP:LIM 65.00
The RHUMidity suffix,
specifies the value for the upper humidity alarm limit. Specifying the MIN, MAX, or
DEF parameter sets the upper humidity alarm limit to the minimum, maximum, or default
value respectively. This command may be password protected (see Password
Commands).
ALARm:TEMPurature
Indicates whether a lower temperature alarm event has occurred for the specified channel.
Example: ALAR:TEMP1:LOW?
Response: 1
The TEMPerature suffix,
a lower temperature alarm event has occurred on the specified channel. A value of 0 is
returned if a lower temperature alarm event has not occurred on the specified channel.
ALARm:TEMPurature
Returns the state of the lower temperature alarm enable for the specified channel.
Example: ALAR:TEMP1:LOW:ENAB?
Response: 0
The TEMPerature suffix,
the lower temperature alarm is enabled. A value of 0 is returned if the lower temperature
alarm is disabled.
ALARm:TEMPurature
Sets the state of the lower temperature alarm enable for the specified channel.