Fluke 5020A - Manual (Page 69)

Menu Functions
System Menu
5
5-33
avu045.jpg
Figure 5-44. Password
By default the password is set to “5020A” when the instrument ships from the factory.
We recommend the user changes the default password to secure the password-protected
settings.
NOTE
Keep your password in a secure location.
If an incorrect password is entered, the message WRONG PASSWORD is displayed and
access to the password-protected parameters is denied. Press the E button to reenter the
password.
If a correct password is entered, the password-protected parameters PASS, SENSOR,
RECORD, STATS, ALARM, and TIME are displayed.
The PASS parameter allows the user to change the password and consists of a four digit
number.
The SENSOR parameter allows the user to turn the password-protection for sensor and
channel settings ON or OFF.
The RECORD parameter allows the user to turn the password-protection for data
recording settings ON or OFF.
The STATS parameter allows the user to turn the password-protection of statistics and
daily stats settings ON or OFF.
The ALARM parameter allows the user to turn the password-protection of alarm settings
ON or OFF.
The TIME parameter allows the user to turn the password-protection of time and date
settings ON or OFF.
Press the B C buttons to highlight the digit to change. Use the A D buttons to scroll
through the numbers 0-9. Press the E button to save the new setting. Press the F
button to cancel any changes and to move to the next parameter or exit to the menu.
Note
Keep your password in a secure location and do not forget the password.